home *** CD-ROM | disk | FTP | other *** search
- DOS.TXT - Installation instructions for MS-DOS 5.x and MS-DOS 6.x
- (or compatible)
-
- Note, this document is written from the perspective of installing
- the full version of TAPEDISK. The installaion of the full version
- of TAPEDISK normaly installs into C:\TD650. If you are installing
- the TAPEDISK Demo the default directory for installation is
- C:\TD650250. The TAPEDISK Demo V6.4.0 is a 250MB restricted version
- of TAPEDISK.
-
- If you have installed this into a different directory please
- make adjustments to the following documentation.
-
- You should read the TAPEDISK User's Guide for complete installation
- instructions. TAPEDISK does have an automatic configuration editor.
-
- For most configurations the automatic process works well. Some systems
- may encounter problems with the automatic installation procedure. It
- is important for you to understand the requirements for proper installation
- of the TAPEDISK device driver.
-
- To start the TAPEDISK Configuration Editor please exit Windows 3.1x and
- shut down any TSRs. Set the current drive and directory to that of
- the TAPEDISK software and enter CONFIG. Example:
-
- C:
- CD \TD650
- CONFIG
-
- Then answer the questions presented by the TAPEDISK Configuration
- Editor.
-
- ---
- End DOC.TXT
-
-
-